Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Hyundai Veracruz GLS, AWDFACTORY OEM SERVICE PROCEDURE
General Information - Fuel System: Specifications: Actuators
Injector
- Number: 6
- SpecificationITEM SPECIFICATION
Item Specification Coil Resistance (Ω) 11.4 ~ 12.6 Ω at 20°C (68°F)
Purge Control Solenoid Valve (PCSV)
- Type: Duty control type
- SpecificationITEM SPECIFICATION
Item Specification Coil Resistance (Ω) 19.0 ~ 22.0 Ω at 20°C (68°F)
Variable Intake Solenoid (VIS) Valve
CVVT Oil Control Valve (OCV)
ETC Motor
- SpecificationITEM SPECIFICATION
Item Specification Coil Resistance (Ω) 1.275 ~ 1.725 Ω at 20°C (68°F)
Ignition Coil
- Type: Stick type
- SpecificationITEM SPECIFICATION
Item Specification 1st Coil Resistance (Ω) 0.62 Ω ± 10% at 20°C (68°F) 2nd Coil Resistance (kΩ) 7.0 kΩ ± 15% at 20°C (68°F)
Canister Close Valve (CCV)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.