2012 Hyundai Veloster Standard TransFACTORY OEM SERVICE PROCEDURE

Smart Key System: Specifications: Specification

SMART KEY UNIT SPECIFICATION

Items Specification
Rated voltage DC 12V
Operating voltage DC 9 ~ 16V
Operating temperature -30°C ~ 75°C (-22°F ~ 167°F)
Load Max. 5mA (When welcome light function off)
SMART KEY FOB SPECIFICATION

Items Specification
Battery Lithium battery 3V 1EA
Distance 30m from vehicle, RF: 30m, Passive (LF): 0.7m
Battery life More than 2 years (10 times/a day)
Push buttons 4 (Door lock/unlock, Trunk lid, Panic)
Frequency (Rx) 125 kHz
Frequency (Tx) 315 MHz
Numbers 2EA
ANTENNA SPECIFICATION

Items Specification
Rated voltage DC 12V
Operating voltage DC 9 ~ 16V
Operating temperature -30°C ~ 75°C (-22°F ~ 167°F)
Frequency 125kHz
Numbers Interior (3EA), Door (2EA), Bumper (1EA)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.