2012 Hyundai Veloster Standard TransFACTORY OEM SERVICE PROCEDURE

Variant coding Procedure

  • On-Line type on GDSΒ 
    1. Ignition "OFF", connect GDS.
    2. Ignition "ON" & Engine "OFF" select vehicle name and airbag system.
    3. Select Variant coding mode.
    4. Follow steps on the screen as below.
      1. Initial ACU Variant Coding screen
        Fig 1: Display - Initial ACU Variant Coding Screen
        G08807470Courtesy of HYUNDAI MOTOR AMERICA
      2. VIN Code entering screen
        Fig 2: Display - VIN Code Entering Screen
        G08807471Courtesy of HYUNDAI MOTOR AMERICA
      3. Variant coding's proceeding screen-1
        Fig 3: Display - Variant Coding's Proceeding Screen-1
        G08807472Courtesy of HYUNDAI MOTOR AMERICA
      4. Variant coding's proceeding screen-2
        Fig 4: Display - Variant Coding's Proceeding Screen-2
        G08807473Courtesy of HYUNDAI MOTOR AMERICA
      5. Variant coding is completed
        Fig 5: Display - Variant Coding Completed
        G08807474Courtesy of HYUNDAI MOTOR AMERICA
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.