Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Hyundai Tucson FWD L4-2.0LFACTORY OEM SERVICE PROCEDURE
Rear Subframe: Service and Repair
Replacement
1. Remove the rear wheel & tire.
Tightening torque :
88.3 - 107.9N.m(9.0 - 11.0Kgf.m, 65.1 - 79.6lb-ft)
CAUTION:
Be careful not to damage to the hub bolts when removing the front wheel & tire.
2. Remove the parking brake cable.
3. Loosen the bolt and then remove the trailing arm(A).
Tightening torque :
98.1 - 117.7N.m(10.0 - 12.0Kgf.m, 72.3 - 86.8lb-ft)
4. Loosen the shock absorber mounting bolts(A).
Tightening torque :
49.0 - 63.7N.m(5.0 - 6.5Kgf.m, 36.2 - 47.0lb-ft)
5. Remove the rear muffler.
6. Loosen the bolt and then remove the propeller shaft.
7. Loosen the mounting bolts and then remove the rear cross member with the frame.
Tightening torque :
156.9 - 176.5N.m(16.0 - 18.0Kgf.m, 115.7 - 130.2lb-ft)
8. Remove the rear lower arm.
9. Remove the rear shock absorber.
10. Remove the rear upper arm.
11. Remove the trailing arm.
12. Remove the rear assist arm.
13. Remove the rear driveshaft.
14. Remove the differential carrier.
15. Installation is the reverse of removal.
16. Check the alignment.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.
