Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2012 Hyundai AzeraFACTORY OEM SERVICE PROCEDURE
Carb OBD In-Use Monitor Performance Data Collection (Dc1) (SC DC1)
Publication date: 2012-09-01
Reference number: SC DC1
Supersedes refnos: 12-01-030
CARB OBD IN-USE MONITOR PERFORMANCE DATA COLLECTION (DC1)
Reference number: SC DC1
Supersedes refnos: 12-01-030
CARB OBD IN-USE MONITOR PERFORMANCE DATA COLLECTION (DC1)
SERVICE CAMPAIGN BULLETIN
Reference Number(s): 12-01-030, Date of Issue:
September, 2012
Superceded Bulletin(s): 11-01-067, Date of Issue:
September 01, 2012
| HYUNDAI: | 2012-2013 MODELS IN WEBDCS |
| GROUP: | CAMPAIGN |
REVISION HISTORY
NOTE:
This TSB supersedes bulletin 11-01-067 to add 2013MY.
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.