Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
General Information (Engine Electrical System): Specifications: Specification
Ignition System
| Items | Specification | ||
|---|---|---|---|
| Ignition coil | Primary resistance | 0.62 ± 10 % (Ω) | |
| Secondary resistance | 7.0 ± 15 % (kΩ) | ||
| Spark plugs | Unleaded | Type | FK16HQR11 |
| Gap | 1.0 ~ 1.1 mm (0.0394 ~ 0.0433 in.) | ||
Starting System
| Items | Specification | ||
|---|---|---|---|
| Starter | Rated voltage | 12V, 1.2kW | |
| No. of pinion teeth | 11 | ||
| No-load characteristics | Voltage | 11.5V | |
| Ampere | 90A, MAX | ||
| Speed | 2, 600rpm, MIN | ||
Charging System
| Items | Specification | ||
|---|---|---|---|
| 2.0 | 2.4 | ||
| Alternator | Type | Battery voltage sensing | |
| Rate voltage | 13.5 V, 110A | ||
| Speed in use | 1, 000 ~ 18, 000 rpm | ||
| Voltage regulator | IC regulator built-in type | ||
| Regulator setting voltage | 14.4 ± 0.1V | ||
| Temperature compensation | -3.5 ± 1mV / °C | ||
| Battery | Type | 48-23GL | 54-26GL |
| Cold cranking amperage [at -18°C (-0.4°F)] | 550A | 600A | |
| Reserve capacity | 92min | 110min | |
| Specific gravity [at 25°C (77°F)] | 1.280 ± 0.01 | ||
- COLD CRANKING AMPERAGE is the amperage a battery can deliver for 30 seconds and maintain a terminal voltage of 7.2V or greater at a specified temperature.
- RESERVE CAPACITY RATING is amount of time a battery can deliver 25A and maintain a minimum terminal voltage of 10.5V at 26.7°C (80.1°F).
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
No obligation. See pricing before you book.