2011 Hyundai Genesis 4.6FACTORY OEM SERVICE PROCEDURE

Tightening Torques

TIGHTENING TORQUES

Item kgf.m Nm lb-ft
Driver Airbag (DAB) 0.8 ~ 1.1 7.8 ~ 10.8 5.8 ~ 8.0
Passenger Airbag (PAB) Bolt :0.7 ~ 1.1 6.9 ~ 10.8 5.1 ~ 8.0
Nut: 0.6 ~ 0.7 5.9 ~ 6.9 4.3 ~ 5.0
Curtain Airbag (CAB) 1.2 ~ 1.5 11.8 ~ 14.7 8.7 ~ 10.9
Side Airbag (SAB) 0.7 ~ 0.9 6.9 ~ 8.8 5.1 ~ 6.5
Seat Belt Anchor Bolt (BPT) 4.0 ~ 5.5 39.2 ~ 53.9 28.9 ~ 39.8
SRSCM 0.7 ~ 2.0 6.9 ~ 19.6 5.1 ~ 14.5
Front Impact Sensor (FIS) Mounting Screw 0.6 ~ 0.7 5.9 ~ 6.9 4.3 ~ 5.1
Side Impact Sensor (SIS) Mounting Bolt 0.7 ~ 0.9 6.9 ~ 8.8 5.1 ~ 6.5
Pressure Side Impact Sensor (P-SIS) 0.11 ~ 0.13 1.1 ~ 1.3 0.8 ~ 0.9
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.