Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Hyundai Equus SignatureFACTORY OEM SERVICE PROCEDURE
Tightening Torques
RESTRAINT TIGHTENING TORQUE SPECIFICATIONS
| Item | kgf.m | N.m | lb-ft |
|---|---|---|---|
| Driver Airbag (DAB) | 0.8 ~ 1.1 | 7.8 ~ 10.8 | 5.8 ~ 8.0 |
| Passenger Airbag (PAB) | Bolt: 0.8 ~ 1.2 Nut: 0.5 ~ 0.8 |
7.8 ~ 11.8 4.9 ~ 7.8 |
5.8 ~ 8.7 3.6 ~ 5.8 |
| Curtain Airbag (CAB) | 1.2 ~ 1.5 | 11.8 ~ 14.7 | 8.7 ~ 10.9 |
| Side Airbag (SAB) | 0.7 ~ 0.9 | 6.9 ~ 8.8 | 5.1 ~ 6.5 |
| Knee Airbag (KAB) | 0.55 ~ 0.66 | 5.4 ~ 6.5 | 4.0 ~ 4.8 |
| Seat Belt Pretensioner (BPT) | 4.0 ~ 5.5 | 39.2 ~53.9 | 28.9 ~ 39.8 |
| SRSCM | 0.7 ~ 0.9 | 6.9 ~8.8 | 5.1 ~ 6.5 |
| Front Impact Sensor (FIS) | 0.6 ~ 0.7 | 5.9 ~ 6.9 | 4.3 ~ 5.1 |
| Pressure Side Impact Sensor (P-SIS) | 0.11 ~ 0.13 | 1.1 ~ 1.3 | 0.8 ~ 0.9 |
| Rear Side Impact Sensor (RSIS) | 0.7 ~ 0.9 | 6.9 ~ 8.8 | 5.1 ~ 6.5 |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.