Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2011 Hyundai Equus Signature
Quick Lookups: Fluids
2011 Hyundai Equus SignatureSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.60 OZS. | 0.16 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.44 LBS. | 0.65 KG | R-134a | S | |||
| Automatic Transmission Fluid | 10.04 QTS. | 9.5 L | Automatic Transmission Fluid M 1375.4 or other brands meeting the specification approved by Hyundai Motor Co. | S | |||
| Brake Fluid | 0.70 QTS. | 0.66 L | DOT 3 or DOT 4 Brake Fluid | As required. | S | ||
| Differential Gear Oil | 1.48 QTS. | 1.4 L | Hypoid Gear Oil API GL-5, SAE 75W-90 | SHELL SPIRAX X or equivalent. | S | ||
| Engine Coolant | 12.35 QTS. | 11.68 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | The engine coolant should be compatible with aluminum engine parts. | S | ||
| Engine Oil | 6.87 QTS. | 6.5 L | API - SM, ILSAC GF-4 or above, SAE 5W-20, 5W-30 | If the API service SM engine oil is not available, you may use API service SL. | S | ||
| Fuel Tank | 20.34 GALS. | 76.99 L | S | ||||
| Power Steering Fluid | 0.95 QTS. | 0.89 L | Pentosin CHF 202 | S | |||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.