Air Conditioning System DTCS

2011 Hyundai Equus SignatureSECTION Air Conditioning System DTCS
AIR CONDITIONING SYSTEM DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

DTC Description
DTC B1204 Air Mix Potentiometer Open (Low) - Passenger
DTC B1205 Air Mix Potentiometer Short (High) - Passenger
DTC B1208 Intake Potentiometer Open (Low)
DTC B1209 Intake Potentiometer Short (High)
DTC B1233 In-Car Temperature Sensor Short (Low)
DTC B1234 In-Car Temperature Sensor Open (High)
DTC B1237 Ambient Temperature Sensor Short (Low)
DTC B1238 Ambient Temperature Sensor Open (High)
DTC B1241 Evaporator Temperature Sensor Short (Low)
DTC B1242 Evaporator Sensor Open (High)
DTC B1245 Air Mix Potentiometer Open (Low) - Driver
DTC B1246 Air Mix Potentiometer Short (High) - Driver
DTC B1249 Direction Potentiometer Open (Low) - Driver
DTC B1250 Direction Potentiometer Short (High) - Driver
DTC B1257 AQS Sensor Open
DTC B1258 AQS Sensor Short
DTC B1259 AQS Sensor Fault
DTC B1275 Air Mix Potentiometer-VENT Open (Low) - Console
DTC B1276 Air Mix Potentiometer VENT Short(High) - Console
DTC B1277 Air Mix Potentiometer-TEMP Open (Low) - Console
DTC B1278 Air Mix Potentiometer-TEMP Short (High) - Console
DTC B1279 Air Mix Potentiometer Open (Low) - Console
DTC B1280 Air Mix Switch Potentiometer Short (High) - Console
DTC B1281 Humidity Sensor Short (Low) - AUTO Defog
DTC B1282 Humidity Sensor Open (High) - AUTO Defog
DTC B1283 Direction Potentiometer Open (Low) - AUTO Defog
DTC B1284 Direction Potentiometer Short (High) - Auto Defog
DTC B1285 Direction Control Motor - AUTO Defog
DTC B1672 APT Sensor Fault-CAN Signal
DTC B1685 Engine RPM fault-CAN Signal
DTC B1686 Vehicle Speed Sensor fault-CAN Signal
DTC B1687 Engine Coolant Temperature Sensor Circuit-CAN Signal
DTC B1688 Cluster lonizer Fault
DTC B2406 Air Mix Motor-Driver
DTC B2408 Intake Motor
DTC B2409 Direction Control Motor - Driver
DTC B2415 Air Mix Door Motor - Passenger
DTC B2447 Air Mix Motor VENT - Console
DTC B2448 Air Mix Motor TEMP - Console
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.