2011 Hyundai Equus SignatureFACTORY OEM SERVICE PROCEDURE

Ignition System

IGNITION SYSTEM SPECIFICATION CHART

Items Specification
Ignition coil Primary resistance 0.62 ± 10 %
Secondary resistance 7.0kΩ ± 15 %
Spark plugs Unleaded Type T40246P
Gap 1.0 ~ 1.1 mm (0.0394 ~ 0.0433 in.)
Condenser Capacity (1kHz) 0.47μF
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.