General Information': DTC Detecting Condition

2011 Hyundai Equus SignatureSECTION DTC Detecting Condition
DTC DETECTING CONDITION AND POSSIBLE CAUSES

Item Detecting Condition Possible Cause
DTC Strategy
  • Signal monitoring
  1. LIN communication circuit open.
  2. Faulty in Headlamp.
Enable Conditions
  • IG ON
Threshold Value
  • LIN communication circuit short to battery or short to ground.
Detecting time
  • 1sec.
Fail Safe
  • Before initialization - Swivelling: stop at present status. Levelling: stop at present status.
  • After initialization - Leveling -2.8% down Swivelling move to 0Β° position
Check Lamp
  • AFLS OFF lamp blinks.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.