Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Hyundai Azera GLSFACTORY OEM SERVICE PROCEDURE
General Information (Automatic Transaxle System): Specifications
AUTOMATIC TRANSAXLE SYSTEM SPECIFICATIONS
| Item | Specification | ||
|---|---|---|---|
| Transmission type | A6LF1 | A6LF2 | |
| Engine model | Gasoline 3.3 | Gasoline 3.8 | |
| Torque converter type | 3-element, 1-stage, 2-phase type | ||
| Torque converter size | Ø236 mm (9.2913 in.) | ||
| Oil pump system | Parachoid | ||
| Friction elements | Clutch: 2EA | ||
| Brake: 3EA | |||
| OWC: 1EA | |||
| Planetary gear | 3EA | ||
| Gear ratio | 1st | 4.252 | |
| 2nd | 2.654 | ||
| 3rd | 1.804 | ||
| 4th | 1.386 | ||
| 5th | 1.000 | ||
| 6th | 0.772 | ||
| Reverse | 3.393 | ||
| Final gear ratio | 3.041 | ||
| Fluid pressure balance piston | 2EA | ||
| Accumulator | 4EA | ||
| Solenoid valve | 8EA (VFS: 6EA, ON/OFF: 2EA) | ||
| Shift lever position | 4 Range (P, R, N, D) | ||
| Oil filter | 1EA | ||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.