Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Hyundai Azera GLSFACTORY OEM SERVICE PROCEDURE
Automatic Transaxle
AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION
| DTC | Description |
|---|---|
| DTC P0601 | Internal Control Module Memory Check Sum Error |
| DTC P0705 | Transmission Range Sensor Circuit Malfunction |
| DTC P0706 | Transmission Range Sensor Circuit Range/Performance |
| DTC P0712 | Transmission Fluid Temperature Sensor 'A' Circuit Low Input |
| DTC P0713 | Transmission Fluid Temperature Sensor 'A' Circuit High Input |
| DTC P0717 | Transmission Fluid Temperature Sensor 'A' Circuit No Signal |
| DTC P0722 | Output speed sensor Circuit No Signal |
| DTC P0731 | Gear 1 Incorrect Ratio |
| DTC P0733 | Gear 3 Incorrect Ratio |
| DTC P0732 | Gear 2 Incorrect Ratio |
| DTC P0734 | Gear 4 Incorrect Ratio |
| DTC P0735 | Gear 5 Incorrect Ratio |
| DTC P0729 | Gear 3 Incorrect Ratio |
| DTC P0741 | Torque Converter Clutch Performance Or Stuck Off |
| DTC P0743 | Torque converter clutch circuit Electrical |
| DTC P0748 | Pressure Control Solenoid Valve (VFS) 'A' Electrical |
| DTC P0753 | Shift Solenoid Valve 'A' Electrical (UD/B) |
| DTC P0758 | Shift Control Solenoid Valve 'B' Electrical (2-6/B) |
| DTC P0763 | Shift Control Solenoid Valve 'C' Electrical (35R/C) |
| DTC P0768 | Shift Control Solenoid Valve 'D' Electrical (OD/C) |
| DTC P0773 | Shift Control Solenoid Valve 'E' Electrical (SS/A) |
| DTC P0880 | TCM Power Signal Error Open/Short(GND) |
| DTC P0955 | Auto Shift Manual Mode Circuit |
| DTC P2709 | Shift Control Solenoid Valve 'F' Electrical (SS/B) |
| DTC U0001 | High Speed CAN Communication Bus off |
| DTC U0100 | Lost Communication With ECM/PCM'A' |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.