2011 Hyundai Azera GLSFACTORY OEM SERVICE PROCEDURE

Repair Procedures: Disassembly

  1. Remove the alternator cover(A) using a screw driver(B).
    Fig 1: Removing Alternator Cover Using Screw Driver
    G06801622Courtesy of HYUNDAI MOTOR CO.
  2. Remove the slip ring guide(A).
  3. Loosen the mounting bolts(B) and disconnect the brush holder assembly(C).
    Fig 2: Locating Slip Ring Guide, Mounting Bolts And Brush Holder Assembly
    G06801623Courtesy of HYUNDAI MOTOR CO.
  4. Remove the rectifier(A) with 4 screws.
    Fig 3: Locating Rectifier And Screws
    G06801624Courtesy of HYUNDAI MOTOR CO.
  5. Remove the nut, pulley(A) and spacer.
    Fig 4: Removing Nut, Pulley And Spacer
    G06801625Courtesy of HYUNDAI MOTOR CO.
  6. Loosen the 4 nuts(A).
    Fig 5: Locating Nuts
    G06801626Courtesy of HYUNDAI MOTOR CO.
  7. Disconnect the rotor(A) and cover(B).
    Fig 6: Locating Rotor And Cover
    G06801627Courtesy of HYUNDAI MOTOR CO.
  8. Reassembly is the reverse order of disassembly.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.

Rather have a pro handle this?

A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.

Comes to youSame-day available12-month warranty
Get a Free Quote

No obligation. See pricing before you book.