Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2011 Hyundai Azera GLSFACTORY OEM SERVICE PROCEDURE
General Information (Fuel System): Specifications: Actuators
Injector
- SpecificationACTUATORS SPECIFICATIONS
Item Specification Coil Resistance (Ω) 11.6 ~ 12.4 [20°C(68°F)]
ETC Motor [integrated into ETC Module]
- SpecificationETC MOTOR SPECIFICATIONS
Item Specification Coil Resistance (Ω) 1.275 ~ 1.725 [20°C(68°F)]
Purge Control Solenoid Valve (PCSV)
- SpecificationPURGE CONTROL SOLENOID VALVE SPECIFICATIONS
Item Specification Coil Resistance (Ω) 19.0 ~ 22.0 [20°C(68°F)]
CVVT Oil Control Valve (OCV)
- SpecificationCVVT OIL CONTROL VALVE SPECIFICATIONS
Item Specification Coil Resistance (Ω) 6.7 ~ 7.7 [20°C(68°F)]
Ignition Coil
- Type: Stick type
- SpecificationIGNITION COIL SPECIFICATIONS
Item Specification 1st Coil Resistance (Ω) 0.62 ± 10[20°C(68°F)] 2nd Coil Resistance (kΩ) 7.0 ± 15[20°C(68°F)]
Canister Close Valve (CCV)
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.