Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
2011 Hyundai Accent GLS, Automatic
Quick Lookups: Fluids
2011 Hyundai Accent GLS, AutomaticSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.40 OZS. | 0.15 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.10 LBS. | 0.49 KG | R-134a | S | |||
| Automatic Transmission Fluid | 6.44 QTS. | 6.09 L | HYUNDAI Automatic Transmission Fluid DIAMOND SP III or SK Automatic Transmission Fluid SP III | S | |||
| Brake Fluid | N/A | N/A | FMVSS116 DOT 3 or DOT 4 Brake Fluid | As required. | S | ||
| Engine Coolant | Automatic Trans | 5.60 QTS. | 5.29 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | The engine coolant should be compatible with aluminum engine parts. | S | |
| Engine Oil | Drain and Refill,w/Filter | 3.48 QTS. | 3.29 L | API - SM or Above, SAE 5W-20, 5W-30, ILSAC GF-3 or Above, SAE 10W-30 Above 0Deg F (-18Deg C) | If API service SM engine oil is not available you may use API service SL. | S | |
| Engine Oil | Drain and Refill,w/o Filter | 3.17 QTS. | 2.99 L | API - SM or Above, SAE 5W-20, 5W-30, ILSAC GF-3 or Above, SAE 10W-30 Above 0Deg F (-18Deg C) | If API service SM engine oil is not available you may use API service SL. | S | |
| Fuel Tank | 11.90 GALS. | 45.04 L | S | ||||
| Manual Transmission Fluid | 2.00 QTS. | 1.89 L | HYUNDAI API - GL-4 Manual Transmission Fluid, SAE 75W-85 | Fill for-life. | S | ||
| Power Steering Fluid | N/A | N/A | Power Steering Fluid Type 3 Fluid | S | |||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.