Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Hyundai Azera V6-3.3LFACTORY OEM SERVICE PROCEDURE
Timing Cover
Timing Cover
The dowel pins on the cylinder block and holes on the timing chain cover should be used as a reference in order to assemble the timing chain cover to be in exact position.
Tightening torque
B(17) : 18.62 - 21.56 N.m (1.9 - 2.2 kgf.m, 13.74 - 15.91 lb-ft)
C(4) : 9.80 - 11.76 N.m (1.0 - 1.2 kgf.m, 7.23 - 8.68 lb-ft)
D(1) : 58.80 - 68.80 N.m (6.0 - 7.0 kgf.m, 43.40 - 50.63 lb-ft)
E(1) : 58.80 - 68.80 N.m (6.0 - 7.0 kgf.m, 43.40 - 50.63 lb-ft)
F(2) : 24.50 - 26.46 N.m (2.5 - 2.7 kgf.m, 18.08 - 19.53 lb-ft)
G(4) : 21.56 - 23.52 N.m (2.2 - 2.4 kgf.m, 15.91 - 17.36 lb-ft)
H(1) : 9.80 - 11.76 N.m (1.0 - 1.2 kgf.m, 7.23 - 8.68 lb-ft)
I(1) : 9.80 - 11.76 N.m (1.0 - 1.2 kgf.m, 7.23 - 8.68 lb-ft)
J(1) : 9.80 - 11.76 N.m (1.0 - 1.2 kgf.m, 7.23 - 8.68 lb-ft)
K(4) : 9.80 - 11.76 N.m (1.0 - 1.2 kgf.m, 7.23 - 8.68 lb-ft)
L(1): 21.56 - 26.46 N.m (2.2 - 2.7 kgf.m, 15.91 - 19.53 lb-ft)
- New bolt
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.