Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2010 Hyundai Azera GLSFACTORY OEM SERVICE PROCEDURE
Assist Door Module (ADM)
Input/Output Value
INPUT/OUTPUT VALUE CHART
| ADM Display | Description | Unit |
|---|---|---|
| Pa.door Lock | Passenger Door Lock/Unlock | ON/OFF |
| Pa.door Unlock | Passenger Rear Door Lock/Unlock | ON/OFF |
| Pa.door Open | Passenger Door Open/Close | ON/OFF |
| Pa.door Lock SW | Passenger Door Lock Switch ON | ON/OFF |
| Pa.door Unlock SW | Passenger Door Unlock Switch ON | ON/OFF |
| IGN 2 Switch | Ign 2 Switchitch ON | ON/OFF |
| Pa.window Auto Sw-down | Passenger Window Auto Switch ON-DOWN | ON/OFF |
| Pa.window Sw-down | Passenger Window Switch ON-DOWN | ON/OFF |
| Pa.window Auto Sw-up | Passenger Window Auto Switch ON-UP | ON/OFF |
| Pa.window Sw-up | Passenger Window Switch ON-UP | ON/OFF |
| Mirror Hori. Pos. | Passenger Mirror Horizontal Position Sensor Voltage | Volts |
| Mirror Vert. Pos. | Passenger Mirror Vertical Position Sensor Voltage | Volts |
ADM DTC List
ADM DTC LIST
| DTC | DDM Display | Description |
|---|---|---|
| B1602 | CAN ERROR | CAN ERROR |
| B1603 | CAN BUS OFF | CAN BUS OFF |
| B1912 | ROSM_H | Passenger outside mirror horizontal operation failure |
| B1913 | ROSM_V | Passenger outside mirror vertical operation failure |
ADM Actuator List
ADM ACTUATOR LIST
| Actuator | Description |
|---|---|
| Passenger Window Auto Up | Passenger power window operation by the highest of the window |
| Passenger Window Auto Down | Passenger power window operation by the lowest of the window |
| Passenger Outside Mirror High Position | Passenger outside mirror operation by the highest |
| Passenger Outside Mirror Low Position | Passenger outside mirror operation by the lowest |
| Passenger Outside Mirror Left Position | Passenger outside mirror operation by the end of left |
| Passenger Outside Mirror Right Position | Passenger outside mirror operation by the end of right |
| Passenger Side Fold | Passenger outside mirror fold operation |
| Passenger Side Unfold | Passenger outside mirror unfold operation |
Power Seat Module (IMS)
Input/Output value
INPUT/OUTPUT VALUE CHART
| DISPLAY | DESCRIPTION | UNIT |
|---|---|---|
| "P" Position Switch | Shift Lever "P" Position Switch ON | ON/OFF |
| "R" Position Switch | Shift Lever "R" Position Switch ON | ON/OFF |
| Recline Forward Switch | Reclining Forward Switch ON | ON/OFF |
| Recline Backward Switch | Reclining Backward Switch ON | ON/OFF |
| Recline Forward Limit Switch | Reclining Forward Limit Switch ON | ON/OFF |
| Recline Backward Limit Switch | Reclining Backward Limit Switch ON | ON/OFF |
| Slide Forward Switch | Slide Forward Switch ON | ON/OFF |
| Slide Backward Switch | Slide Backward Switch ON | ON/OFF |
| Slide Forward Limit Switch | Slide Forward Limit Switch ON | ON/OFF |
| Slide Backward Limit Switch | Slide Backward Limit Switch ON | ON/OFF |
| Front Height Up Switch | Front Height Up Switch ON | ON/OFF |
| Front Height Down Switch | Front Height Down Switch ON | ON/OFF |
| Rear Height Up Switch | Rear Height Up Switch ON | ON/OFF |
| Rear Height Down Switch | Rear Height Down Switch ON | ON/OFF |
| IGN 2 Switch | IGN 2 Switch ON | ON/OFF |
| Recline Position | Recline Position | ON/OFF |
| Front Height Position | Front Height Position | ON/OFF |
| Rear Height Position | Rear Height Position | ON/OFF |
| Slide Position | Slide Positio | ON/OFF |
IMS DTC List
IMS DTC LIST
| DTC Code | Display | Description |
|---|---|---|
| B1602 | CAN ERR | CAN ERROR |
| B1603 | CAN BUS OFF | CAN BUS OFF |
| B1954 | SLI | Slide motor & position sensor faulty |
| B1955 | REC | Recline motor & position sensor faulty |
| B1956 | FRH | Front height motor & position sensor faulty |
| B1957 | RRHM | Right Rear Height Motor or Sensor Error |
IMS Actuator List
IMS ACTUATOR LIST
| Actuator | Description |
|---|---|
| P/seat Slide Formost Position | Power Seat Slide Formost Position |
| P/seat Slide Last Position | Power Seat Slide Last Position |
| P/seat Recline Formost Position | Power Seat Recline Formost Position |
| P/seat Recline Last Position | Power Seat Recline Last Position |
| P/seat Height Position-FR | Power Seat Height Position-FR |
| P/seat Lowest Position-FR | Power Seat Lowest Position-FR |
| P/seat Height Position-RR | Power Seat Height Position-RR |
| P/seat Lowest Position-RR | Power Seat Lowest Position-RR |
Tilt & Telescope Module (IMS)
Input/Output value
INPUT/OUTPUT VALUE CHART
| Tilt Display | Description | Unit |
|---|---|---|
| Tilt Up Switch | Tilt Up Switch ON | ON/OFF |
| Tilt Down Switch | Tilt Down Switch ON | ON/OFF |
| Tilt Up Limit SW | Tilt Up Limit Switch ON | ON/OFF |
| Tilt Down Limit SW | Tilt Down Limit Switch ON | ON/OFF |
| Telesco. Forward SW | Telescope Forward Switch ON | ON/OFF |
| Telesco. Backward SW | Telescope Backward Switch ON | ON/OFF |
| Tele. Forw. Limit SW | Telescope Forward Limit Switch ON | ON/OFF |
| Tele. Backw. Limit SW | Telescope Backward Limit Switch ON | ON/OFF |
| IGN2 SW | IGN 2 Switch ON | ON/OFF |
| Tilt Sensor | The value, The lowest point = 0 | |
| Telescope Sensor | The value, The backwards point = 0 |
TILT DTC List
TILT DTC LIST
| DTC | Display | Description |
|---|---|---|
| B1602 | CAN ERR | CAN ERROR |
| B1603 | CAN BUS OFF | CAN BUS OFF |
| B1959 | TILT | Tilt motor & position sensor faulty |
| B1960 | TELE | Telescope motor & position sensor faulty |
Tilt Actuator List
TILT ACTUATOR LIST
| Actuator | Description |
|---|---|
| Steering Column High-tilt | Tilt motor operation by the highest |
| Steering Column Low-tilt | Tilt motor operation by the lowest |
| Steering Column Short-telescope | Telescope motor operation by the forwardest |
| Steering Column Long-telescope | Telescope motor operation by the backwards |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
