2008 Hyundai Tucson GLS, AutomaticFACTORY OEM SERVICE PROCEDURE

Oil Temperature Sensor: Replacement

  1. Remove the automatic transaxle assembly.
  2. Remove the valve body cover.
  3. Disconnect the oil temperature sensor connector.
  4. Remove the oil temperature sensor (B), loosening the mounting bolt (A).
    Fig 1: Identifying Oil Temperature Sensor And Mounting Bolt
    G04811239Courtesy of HYUNDAI MOTOR CO.
  5. Replace the sensor with the new one and reassemble the rest parts.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.