Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2008ENTOURAGE V6-3.8LREPAIR AND DIAGNOSISBODY AND FRAMEBODY CONTROL SYSTEMSTESTING AND INSPECTIONSCAN TOOL TESTING AND PROCEDURES
2008 Hyundai Entourage V6-3.8L
Scan Tool Testing and Procedures
2008 Hyundai Entourage V6-3.8LSECTION Scan Tool Testing and Procedures
TROUBLE DIAGNOSTICS WHEN USING DIAGNOSIS TOOL
1. The diagnosis tool supports quick diagnosis of supported body electrical systems through input(output monitoring. and actuation testing.
2. To diagnose the BCM function, select the menu of model and body control module.
3. Select the nodule menu to diagnose.
4. The CURRENT DATA function is used to monitor input/output conditions.
5. Use the ACTUATION TEST mode to force output devices to operate for testing purposes.
6. Use the "DIAGNOSTIC TROUBLE CODES" mode.
1. The diagnosis tool supports quick diagnosis of supported body electrical systems through input(output monitoring. and actuation testing.
2. To diagnose the BCM function, select the menu of model and body control module.
3. Select the nodule menu to diagnose.
4. The CURRENT DATA function is used to monitor input/output conditions.
5. Use the ACTUATION TEST mode to force output devices to operate for testing purposes.
6. Use the "DIAGNOSTIC TROUBLE CODES" mode.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.