Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2008 Hyundai Entourage GLSFACTORY OEM SERVICE PROCEDURE
Abs DTCS
ABS DIAGNOSTIC TROUBLE CODE DTC (LIST)
| DTC | DESCRIPTION |
|---|---|
| C1101 | BATTERY VOLTAGE HIGH |
| C1102 | BATTERY VOLTAGE LOW |
| C1200 | FL WHEEL SPEED SENSOR- OPEN/SHORT |
| C1201 | FL WHEEL SENSOR- RANGE/PERFORMANCE |
| C1202 | FL WHEEL SPEED SENSOR-NO SIGNAL |
| C1203 | FR WHEEL SPEED SENSOR- OPEN/SHORT |
| C1204 | FR WHEEL SENSOR- RANGE/PERFORMANCE |
| C1205 | FR WHEEL SPEED SENSOR-NO SIGNAL |
| C1206 | RL WHEEL SPEED SENSOR- OPEN/SHORT |
| C1207 | RL WHEEL SENSOR- RANGE/PERFORMANCE |
| C1208 | RL WHEEL SPEED SENSOR-NO SIGNAL |
| C1209 | RR WHEEL SPEED SENSOR- OPEN/SHORT |
| C1210 | RR WHEEL SENSOR- RANGE/PERFORMANCE |
| C1211 | RR WHEEL SPEED SENSOR-NO SIGNAL |
| C1213 | WHEEL SPEED FREQUENCY ERROR |
| C1235 | PRESSURE SENSOR-ELECTRICAL |
| C1237 | PRESSURE SENSOR-SIGNAL FAULT |
| C1260 | STEERING ANGLE SENSOR-SIGNAL |
| C1261 | STEERING ANGLE SENSOR NOT CALIBRATED |
| C1282 | YAW RATE & LATERAL G SENSOR-ELECTRICAL |
| C1283 | YAW RATE & LATERAL G SENSOR-SIGNAL |
| C1503 | ESC SWITCH ERROR |
| C1513 | BRAKE LIGHT SWITCH MALFUNCTION |
| C1604 | ECU HARDWARE ERROR |
| C1605 | CAN CONTROL HARDWARE ERROR |
| C1611 | CAN TIME OUT-PCM (ECM) |
| C1612 | CAN TIME OUT-PCM (TCM) |
| C1616 | CAN BUS OFF |
| C1623 | CAN TIMEOUT STEERING ANGLE SENSOR |
| C1625 | CAN TIME OUT-ESC |
| C1626 | IMPLAUSIBLE CONTROL |
| C1702 | VARIANT CODING |
| C2112 | VALVE RELAY MALFUNCTION |
| C2308 | FL INLET VALVE MALFUNCTION |
| C2312 | FL OUTLET VALVE MALFUNCTION |
| C2316 | FR INLET VALVE MALFUNCTION |
| C2320 | FR OUTLET VALVE MALFUNCTION |
| C2324 | RL INLET VALVE MALFUNCTION |
| C2328 | RL OUTLET VALVE MALFUNCTION |
| C2332 | RR INLET VALVE MALFUNCTION |
| C2336 | RR OUTLET VALVE MALFUNCTION |
| C2366 | TC VALVE PRIMARY (USV1) ERROR |
| C2370 | TC VALVE SECONDARY (USV2) ERROR |
| C2372 | ESC VALVE 1 (HSV1) ERROR |
| C2374 | ESC VALVE 2 (HSV2) ERROR |
| C2402 | MOTOR-ELECTRICAL |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
Rather have a pro handle this?
A certified mobile mechanic comes to your home or office. They bring the tools, you stay comfortable. No tow truck, no waiting room, no surprises.
Comes to youSame-day available12-month warranty
Get a Free QuoteNo obligation. See pricing before you book.