2007 Hyundai Tiburon SEFACTORY OEM SERVICE PROCEDURE

Quick Lookups: Fluids

FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 5.40 OZS. 0.15 L PAG 46 S
Air Cond Refrigerant 1.37 LBS. 0.62 KG R-134a S
Automatic Transmission Fluid 8.20 QTS. 7.76 L HYUNDAI Automatic Transmission Fluid DIAMOND SP III or SK Automatic Transmission Fluid SP III S
Brake Fluid N/A N/A DOT 3 or DOT 4 Brake Fluid As required. S
Engine Coolant 2.7L Eng 8.50 QTS. 8.04 L 50/50 mixture of Ethylene Glycol Antifreeze and water The engine coolant should be compatible with aluminum engine parts. S
Engine Oil 2.7L Eng Drain and Refill,w/Filter 4.76 QTS. 4.5 L API - SJ, SL or Above, SAE 5W-20, 5W-30, ILSAC GF-3 or Above, SAE 10W-30 Above 0Deg F (-18Deg C) S
Fuel Tank 14.50 GALS. 54.88 L S
Manual Transmission Fluid 6 Spd Trans 2.32 QTS. 2.19 L HYUNDAI API - GL-4 Manual Transmission Fluid, SAE 75W-85 S
Power Steering Fluid N/A N/A Power Steering Fluid Type 3 Fluid S
Windshield Washer Fluid N/A N/A Use a good quality windshield washer fluid, diluted with water as necessary. S
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

Shop Manual-Ready ToolsCompare Repair QuoteQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.