Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Hyundai Azera V6-3.8LFACTORY OEM SERVICE PROCEDURE
Timing Cover
Timing cover
B (17) 18.62 - 21.56 Nm (1.9 2.2 kgf.m, 13.74 - 15.91 ft. lbs.)
C (4) 9.80 - 11.76 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 ft. lbs.)
D (1) 58.80 - 68.80 Nm (6.0 - 7.0 kgf.m, 43.40 - 50.63 ft. lbs.)
E (1) 58.80 - 68.80 Nm (6.0 - 7.0 kgf.m, 43.40 - 50.63 ft. lbs.)
F (2) 24.50 - 26.46 Nm (2.5 - 2.7 kgf.m, 18.08 - 19.53 ft. lbs.)
G (4) 21.56 - 23.52 Nm (2.2 - 2.4 kgf.m, 15.91 - 17.36 ft. lbs.)
H (1) 9.80 - 11.76 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 ft. lbs.)
I (1) 9.80 - 11.76 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 ft. lbs.)
J (1) 9.80 - 11.76 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 ft. lbs.)
K (4) 9.80 - 11.76 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 ft. lbs.)
L (1) 21.56 - 26.46 Nm (2.2 - 2.7 kgf.m, 15.91 - 19.53 ft. lbs.)
- New bolt
B (17) 18.62 - 21.56 Nm (1.9 2.2 kgf.m, 13.74 - 15.91 ft. lbs.)
C (4) 9.80 - 11.76 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 ft. lbs.)
D (1) 58.80 - 68.80 Nm (6.0 - 7.0 kgf.m, 43.40 - 50.63 ft. lbs.)
E (1) 58.80 - 68.80 Nm (6.0 - 7.0 kgf.m, 43.40 - 50.63 ft. lbs.)
F (2) 24.50 - 26.46 Nm (2.5 - 2.7 kgf.m, 18.08 - 19.53 ft. lbs.)
G (4) 21.56 - 23.52 Nm (2.2 - 2.4 kgf.m, 15.91 - 17.36 ft. lbs.)
H (1) 9.80 - 11.76 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 ft. lbs.)
I (1) 9.80 - 11.76 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 ft. lbs.)
J (1) 9.80 - 11.76 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 ft. lbs.)
K (4) 9.80 - 11.76 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 ft. lbs.)
L (1) 21.56 - 26.46 Nm (2.2 - 2.7 kgf.m, 15.91 - 19.53 ft. lbs.)
- New bolt
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.