Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Hyundai Azera V6-3.8LFACTORY OEM SERVICE PROCEDURE
Engine Controls - MIL ON/DTC P0441 Set: Overview
Group FUEL SYSTEM
Number 09-FL-008
Date AUGUST, 2009
Model
SONATA 3.3L
SANTA FE 3.3L
AZERA 3.8L
Subject
ECM UPDATE - MIL ON WITH DTC P0441
DESCRIPTION:
Some 2006-2007 Sonata (NF) 3.3L / Azera (TG) 3.8L, and 2007 Santa Fe (CM) 3.3L vehicles may experience malfunction indicator lamp illumination for DTC P0441 (Evaporative Emission System - Incorrect Purge Flow).
NOTE:
There are no vehicle performance issues associated with this condition.
APPLICABLE VEHICLES:
^ 2006-2007 Sonata (NF) 3.3L
^ 2006-2007 Azera (TG) 3.8L
^ 2007 Santa Fe (CM) 3.3L
NOTE:
To verify the vehicle is affected, be sure to check the version of the vehicle's engine control unit ROM ID with reference to the ROM ID Information Table mentioned below before attempting to update the control unit software.
ROM ID INFORMATION TABLES
NOTE:
Perform the ECM update when DTC P0441 occurs. If the condition exists after the ECM update, perform EVAP system diagnostics related to DTC P0441 prior to replacing the Purge Control Solenoid Valve (PCSV).
WARRANTY INFORMATION
Number 09-FL-008
Date AUGUST, 2009
Model
SONATA 3.3L
SANTA FE 3.3L
AZERA 3.8L
Subject
ECM UPDATE - MIL ON WITH DTC P0441
DESCRIPTION:
Some 2006-2007 Sonata (NF) 3.3L / Azera (TG) 3.8L, and 2007 Santa Fe (CM) 3.3L vehicles may experience malfunction indicator lamp illumination for DTC P0441 (Evaporative Emission System - Incorrect Purge Flow).
NOTE:
There are no vehicle performance issues associated with this condition.
APPLICABLE VEHICLES:
^ 2006-2007 Sonata (NF) 3.3L
^ 2006-2007 Azera (TG) 3.8L
^ 2007 Santa Fe (CM) 3.3L
NOTE:
To verify the vehicle is affected, be sure to check the version of the vehicle's engine control unit ROM ID with reference to the ROM ID Information Table mentioned below before attempting to update the control unit software.
ROM ID INFORMATION TABLES
NOTE:
Perform the ECM update when DTC P0441 occurs. If the condition exists after the ECM update, perform EVAP system diagnostics related to DTC P0441 prior to replacing the Purge Control Solenoid Valve (PCSV).
WARRANTY INFORMATION
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.