2006 Hyundai Azera LimitedFACTORY OEM SERVICE PROCEDURE

Fuel System (G6DA-GSL 3.8): General: Specification: Actuators

INJECTOR 

  • Number: 6
  • Specification
INJECTOR SPECIFICATION

Item Specification
Coil Resistance (Ω) 11.4 ~ 12.6Ω at20°C (68°F)

PURGE CONTROL SOLENOID VALVE (PCSV) 

  • Type: Duty control type
  • Specification
PURGE CONTROL SOLENOID VALVE SPECIFICATION

Item Specification
Coil Resistance (Ω) 19.0 ~ 22.0Ω at20°C (68° F)

VARIABLE INTAKE SOLENOID (VIS) VALVE 

  • Specification
VARIABLE INTAKE SOLENOID VALVE SPECIFICATION

Item Specification
Coil Resistance (Ω) 30.0 ~ 35.00 [22 °C (71.6°F)]

CVVT OIL CONTROL VALVE (OCV) 

  • Specification
CVVT OIL CONTROL VALVE SPECIFICATION

Item Specification
Coil Resistance (Ω) 6.7~7.7S at20°C (68°F)

ETC MOTOR 

  • Specification
ETC MOTOR SPECIFICATION

Item Specification
Coil Resistance (Ω) 1.275 ~ 1.725Ω at 20 °C (68° F)

IGNITION COIL 

  • Type: Stick type
  • Specification
IGNITION COIL SPECIFICATION

Item Specification
1st Coil Resistance (Ω) 0.62Ω ±10% at20°C) (68°F)
2nd Coil Resistance (kΩ) 7.0kΩ ±15% at20°C (68°F)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.