Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2006 Hyundai Accent AutomaticFACTORY OEM SERVICE PROCEDURE
Body Control Module: Specification
SPECIFICATION CHART
| Items | Specification |
|---|---|
| Rated voltage | DC 12V |
| Operating voltage | DC 9 ~ 16V |
| Operating temperature | -22°F~176°F(-30°C ~ 80°C |
| Insulation resistance | 100MΩ or more |
| Parasitic current draw | Less than 4mA (12.8 V) - BCM & Receiver Less than 3mA (12.8V) - BCM |
| Rated load | |
| Burglar horn | DC 12V, 200mA (Inductance load) |
| Burglar relay | DC 12V, 200mA (Inductance load) |
| Tail lamp relay | DC 12V, 200mA (Inductance load) |
| Rear defogger relay | DC 12V, 200mA (Inductance load) |
| Power window timer relay | DC 12V, 200mA (Inductance load) |
| Seat belt warning indicator | DC 12V, 40 ~ 60mW (LED load) |
| Room lamp | DC 12V, 30W (Lamp load) |
| Door lock relay | DC 12V, 200mA (Inductance load) |
| Door unlock relay | DC 12V, 200mA (Inductance load) |
| Hazard lamp relay | DC 12V, 200mA (Inductance load) |
| Driver door actuator | DC 12V, 10W (Motor load) |
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.
