General Specifications (1 Of 2)

Fuel tank Capacity	65 lit. (17.2 U.S. gal., 14.3 Imp. gal.)
Fuel filter Type	High pressure type
Fuel pump Type	Electrical, in-tank type
Driven by	Electric motor
Throttle body Throttle position sensor (TP Sensor) Type Output voltage at curb idle Output voltage at WOT	Variable resistor type 0.3~0.9V (Step motor type) 4.0~4.7V (ETS type) 4.5~5.0V (Step motor type) 0.1~1.0V (ETS type)
Idle speed control (ISC) motor Type Resistance	ETS (Electric throttle system) 28~32 ft at 20°C (68°F)
Idle position switch Type Resistance	Contact type (Built in TPS) Less than 400Ω
Input sensor Mass air flow sensor Type	Hot film type
Intake air temperature (IAT) sensor Type Resistance	Thermistor type 2.33~2.97 kΩ or 2.5~2.7V at 20°C (68°F) 0.31~0.43 kΩ or 0.6~0.8V at 80°C (176°F)
Engine coolant temperature (ECT) sensor Type Resistance	Thermistor type 2.4 kΩ or 2.5~2.7V at 20°C (68°F) 0.3 kΩ or 0.5~0.7V at 80°C (176°F)
Heated oxygen sensor (HO2S) Type	Zirconia sensor
Vehicle speed sensor Type	Hall IC type
Camshaft position (CMP) sensor Type	Hall effect sensor
Crankshaft position (CKP) sensor Type	Hall effect sensor

General Specifications (2 Of 2)

Input sensor Fuel tank pressure (FTP) sensor Type Output voltage	Piezo-resistivity type 0 mmHg (0 Kpa): 2.5V -50 mmHg (-6.6 Kpa): 0.5V +50 mmHg (+6.6 Kpa): 4.5V
Output actuator Injector Type Number Coil resistance	Electromagnetic type 6 13~16Ω at 20°C (68°F)
Fuel pressure regulator Fuel pressure	320~340 kPa (3.26 ~ 3.47 kg/cm² , 46 ~ 49 psi)

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.

• Brakes feel soft, pull hard to one side, or make grinding noises.

• The engine overheats, stalls repeatedly, or misfires under load.

• You are missing required tools, torque specs, or safe lifting equipment.

• You are not confident in the next step or safety outcome.

Safety Warning

Fuel System: General: Specifications