Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSHYUNDAI2003XG350 BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESPECIFICATIONSENGINE CONTROLS - SERVICE & ADJUSTMENT SPECIFICATIONSIGNITION SYSTEMIGNITION COIL

2003 Hyundai XG350 Base

Ignition Coil

2003 Hyundai XG350 BaseSECTION Ignition Coil

IGNITION COIL RESISTANCE - Ohms @ 68°F (20°C)

Application

Primary

Secondary

Accent

0.78-0.96 Ohm

11,000-15,000 Ohms

Elantra

0.45-0.55 Ohm

10,300-13,900 Ohms

Santa Fe

2.4L

0.78-0.96 Ohm ⁽¹⁾

10,200-13,900 Ohms

2.7L

0.67-0.81 Ohm

11,300-15,300 Ohms

3.5L

0.78 Ohm

10,400-15,600 Ohms

Sonata

2.4L

0.77-0.99 Ohm ⁽¹⁾

10,300-13,900 Ohms

2.7L

0.67-0.81 Ohm

11,300-15,300 Ohms

Tiburon

2.0L

0.45-0.55 Ohm

10,300-13,900 Ohms

2.7L

0.67-0.81 Ohm

11,300-15,300 Ohms

XG350

0.67-0.81 Ohm ⁽¹⁾

10,400-15,600 Ohms

⁽¹⁾	Value is approximate with coil energized. See IGNITION CHECKS in BASIC DIAGNOSTIC PROCEDURES article.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.