Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2003TIBURON V6-2.7LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSCRANKSHAFT
2003 Hyundai Tiburon V6-2.7L
Crankshaft
2003 Hyundai Tiburon V6-2.7LSECTION Crankshaft
Crankshaft journal O.D 61.982 - 62.000 mm (2.4402 - 2.4409 in.)
Crankshaft pin O.D 47.982 - 48.000 mm (1.8890 - 1.8898 in.)
Standard value / Oil clearance
Crankshaft main bearing 0.004 - 0.022 mm (0.00015 - 0.00087 in.)
Connecting rod bearing 0.018 - 0.036 mm (0.00071 - 0.00141 in.)
Limit 0.1 mm (0.004 in.)
Main bearing cap bolts
M8 (9-16) 13 - 19 Nm (10 - 14 ft. lbs.) + 90 - 94°
M10 (1-8) 27 - 33 Nm (19.5 - 24 ft. lbs.) + 90 - 94°
Crankshaft end play
Standard 0.070 - 0.250 mm (0.0028 - 0.0098 in.)
Limit 0.4 mm (0.016 in.)
Oil seal case bolt 10 - 12 Nm (7 - 9 ft. lbs.)
Rear plate 10 - 12 Nm (7 - 9 ft. lbs.)
Drive plate and adapter plate bolt 73 - 77 Nm 53 - 56 ft. lbs.)
Fly wheel installation bolt 73 - 77 Nm (53 - 56 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.