Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2003TIBURON V6-2.7LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSCONNECTING ROD
2003 Hyundai Tiburon V6-2.7L
Connecting Rod
2003 Hyundai Tiburon V6-2.7LSECTION Connecting Rod
CONNECTING ROD 2.7L:
Piston ring side clearance
No.1 0.04 - 0.08 mm (0.0016 - 0.0031 in.)
No.2 0.03 - 0.07 mm (0.0012 - 0.0028 in.)
[Limit]
No.1 0.1 mm (0.004 in.)
No.2 0.1 mm (0.004 in.)
Piston ring end gap [Standard dimensions]
No.1 0.20 - 0.35 mm (0.0079 - 0.0138 in.)
No.2 0.37 - 0.52 mm (0.0146 - 0.0205 in.)
Oil ring side rail 0.2 - 0.7 mm (0.0079 - 0.0276 in.)
No.1, No.2 0.8 mm (0.031 in.)
Oil ring side rail 1.0 mm (0.039 in.)
PISTON RING SERVICE SIZE AND MARK:
NOTE: The mark can be found on the upper side of the ring next to the end.
Connecting rod bolt 16 - 20 Nm (12 - 15 ft. lbs.) + 90 - 94°
Connecting rod side clearance
Standard 0.10 - 0.25 mm (0.0039 - 0.0098 in.)
Limit 0.4 mm (0.0157 in.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.