Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2003TIBURON V6-2.7LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEENGINE MOUNT
2003 Hyundai Tiburon V6-2.7L
Engine Mount
2003 Hyundai Tiburon V6-2.7LSECTION Engine Mount
ENGINE MOUNTS 2.7L:
Engine Mounting
Engine mounting insulator bolt 40 - 55 Nm (29 - 40 ft. lbs.)
Engine mounting bracket nut 60 - 80 Nm (43 - 58 ft. lbs.)
Engine mounting bracket bolt 60 - 80 Nm (43 - 58 ft. lbs.)
Engine support bracket stud 30 - 40 Nm (22 - 29 ft. lbs.)
Front roll stopper bracket to sub cross member bolt 40 - 55 Nm (29 - 40 ft. lbs.)
Front roll stopper insulator bolt and nut 50 - 65 Nm (36 - 47 ft. lbs.)
Rear roll stopper bracket to cross member bolt 40 - 55 Nm (29 - 40 ft. lbs.)
Rear roll stopper insulator bolt and nut 50 - 65 Nm (36 - 47 ft. lbs.)
Transaxle mounting bracket bolt 40 - 55 Nm (29 - 40 ft. lbs.)
Transaxle mounting insulator bolt 90 - 110 Nm (65 - 80 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.