Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2003TIBURON V6-2.7LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCONNECTING ROD, ENGINE
2003 Hyundai Tiburon V6-2.7L
Connecting Rod, Engine
2003 Hyundai Tiburon V6-2.7LSECTION Connecting Rod, Engine
Piston pin installation force 2,450 - 12,255 N (250 - 1,250 kg, 551 - 2,755 lb)
Side clearance (big end)
Specification 0.10 - 0.25 mm (0.0039 - 0.0098 inch)
Limit 0.4 mm (0.016 inch)
Bend 0.05 mm or less/100 mm (0.0020 in. or less/3.937 inch)
Bearing oil clearance
Specification 0.018 - 0.036 mm (O.0007 - 0.0014 inch)
Limit 0.1 mm (0.004 inch)
TIGHTENING TORQUE
Connecting rod bolt 16 - 20 Nm (12 - 15 ft. lbs.) + 90 - 94°
Side clearance (big end)
Specification 0.10 - 0.25 mm (0.0039 - 0.0098 inch)
Limit 0.4 mm (0.016 inch)
Bend 0.05 mm or less/100 mm (0.0020 in. or less/3.937 inch)
Bearing oil clearance
Specification 0.018 - 0.036 mm (O.0007 - 0.0014 inch)
Limit 0.1 mm (0.004 inch)
TIGHTENING TORQUE
Connecting rod bolt 16 - 20 Nm (12 - 15 ft. lbs.) + 90 - 94°
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.