2003 Hyundai Tiburon L4-2.0LFACTORY OEM SERVICE PROCEDURE

Connecting Rod, Engine




Connecting rod cap nut 50-53 Nm (500-530 kg-cm, 36-39 ft. lbs.)

Bend 0.05 mm (0.0020 inch) or less
Twist 0.1 mm (0.004 inch) or less

Connecting rod big end to crankshaft side clearance
Standard 0.100-0.250 mm (0.0039-0.0098 inch)
Limit 0.4 mm (0.0157 inch)
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.