2003 Hyundai Tiburon L4-2.0LFACTORY OEM SERVICE PROCEDURE

Key Reminder Function

KEY REMINDER

1. Function explanation When ignition key is in the key cylinder and driver's side door or the passenger's side door is open, if the knob is locked, then it outputs automatically to prevent the door lock.

2. Related schematic diagrams.
- See the Immobilizer Control System, Courtesy & Luggage Room Lamp.


3. Input/output signal.
- Fuse F18 (10 A)
- Input Door warning switch (H4), Driver's side door switch (E9), Passenger's side door switch (E4)

Factory service manual diagram



Factory service manual diagram



4. Related Hi-scan(pro) failure diagnosis.
1. Input/output monitoring.
1. Select "01 POWER" and press [ENTER] Then the following screen will be displayed. Check BCM input condition against door warning switch.

Factory service manual diagram



Factory service manual diagram



2. Select "04 DOOR" and press [ENTER] Then, the following screen will be displayed. Check BCM input condition against driver's side door switch and passenger's side door switch.

5. Expected failure symptoms.
Key reminder function does not work.

Factory service manual diagram



6. Actions by failure symptoms
Key reminder function does not work.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.