Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2003ACCENT L4-1.6LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINESYSTEM SPECIFICATIONSENGINE MOUNTS
2003 Hyundai Accent L4-1.6L
Engine Mounts
2003 Hyundai Accent L4-1.6LSECTION Engine Mounts
ENGINE MOUNTS:
Engine Mounting
Right mounting insulator (large) bolt:..........90-110 Nm (900-1100 kg-cm, 66-81 ft. lbs.)
Right mounting insulator (small) nut:..........50-65 Nm (500-650 kg-cm, 37-48 ft. lbs.)
Transmission mount insulator bolt:..........90-110 Nm (900-1100 kg-cm, 66-81 ft. lbs.)
Transmission insulator bracket to side member bolts:..........30-40 Nm (300-400 kg-cm, 22-30 ft. lbs.)
Front roll stopper insulator bolt:..........45-60 Nm (450-600 kg-cm, 33-44 ft. lbs.)
Front roll stopper bracket to sub frame bolt:..........30-40 Nm (300-400 kg-cm, 22-30 ft. lbs.)
Rear roll stopper insulator bolt:..........45-60 Nm (450-600 kg-cm, 33-44 ft. lbs.)
Rear roll stopper bracket to sub frame bolt:..........30-40 Nm (300-400 kg-cm, 22-31 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.