Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2003ACCENT L4-1.6LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYCONNECTING ROD, ENGINE
2003 Hyundai Accent L4-1.6L
Connecting Rod, Engine
2003 Hyundai Accent L4-1.6LSECTION Connecting Rod, Engine
GENERAL
Bend 0.05 mm (0.0020 inch) or less
Twist 0.1 mm (0.0039 inch) or less
Connecting rod bearing oil clearance 0.018-0.036 mm (0.0007-0.0014 inch)
Undersize 0.25, 0.50, 0.75 mm (0.010, 0.020, 0.030 inch)
Connecting rod big end to crankshaft side clearance 0.100-0.250 mm (0.0039-0.0098 inch)
Limit 0.4 mm (0.0157 inch)
TIGHTENING TORQUE
Connecting rod cap nut 32 - 35 Nm (320 - 350 kg-cm, 24 - 26 ft. lbs.)
Bend 0.05 mm (0.0020 inch) or less
Twist 0.1 mm (0.0039 inch) or less
Connecting rod bearing oil clearance 0.018-0.036 mm (0.0007-0.0014 inch)
Undersize 0.25, 0.50, 0.75 mm (0.010, 0.020, 0.030 inch)
Connecting rod big end to crankshaft side clearance 0.100-0.250 mm (0.0039-0.0098 inch)
Limit 0.4 mm (0.0157 inch)
TIGHTENING TORQUE
Connecting rod cap nut 32 - 35 Nm (320 - 350 kg-cm, 24 - 26 ft. lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.