Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
High-Tension Wire Resistance: Notes
2003 Hyundai Accent BaseSECTION Notes
HIGH-TENSION WIRE RESISTANCE
| Wire Application | (1) Ohms | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Accent | ||||||||||
| BOUGI | ||||||||||
| No. 1 (22" - 560 mm) | 2.51-3.76 | |||||||||
| No. 2 (17" - 440 mm) | 1.97-2.96 | |||||||||
| No. 3 (14" - 360 mm) | 1.61-2.42 | |||||||||
| No. 4 (12" - 310 mm) | 1.39-2.08 | |||||||||
| R16AIPS | ||||||||||
| No. 1 (22" - 560 mm) | 5.60-11.76 | |||||||||
| No. 2 (17" - 440 mm) | 4.40-9.24 | |||||||||
| No. 3 (14" - 360 mm) | 3.60-7.56 | |||||||||
| No. 4 (12" - 310 mm) | 3.10-6.51 | |||||||||
| Elantra | ||||||||||
| BOUGI | ||||||||||
| No. 1 (24" - 605 mm) | 2.71-4.07 | |||||||||
| No. 2 (21" - 545 mm) | 2.44-3.66 | |||||||||
| No. 3 (18" - 450 mm) | 2.02-3.02 | |||||||||
| No. 4 (15" - 370 mm) | 1.66-2.49 | |||||||||
| R16AIPS | ||||||||||
| No. 1 (24" - 605 mm) | 6.05-12.71 | |||||||||
| No. 2 (21" - 545 mm) | 5.45-11.45 | |||||||||
| No. 3 (18" - 450 mm) | 4.50-9.45 | |||||||||
| No. 4 (15" - 370 mm) | 3.70-7.77 | |||||||||
| Santa Fe | ||||||||||
| 2.4L | (1)(2)(3) | |||||||||
| 2.7L | ||||||||||
| No. 1 | 4.39-6.59 | |||||||||
| No. 2 | 2.28-3.43 | |||||||||
| No. 3 | 3.49-5.24 | |||||||||
| No. 4 | 1.90-2.86 | |||||||||
| No. 5 | 3.25-4.87 | |||||||||
| No. 6 | 1.30-1.95 | |||||||||
| 3.5L | (3) | |||||||||
| Sonata | ||||||||||
| 2.4L | (1)(2)(3) | |||||||||
| 2.7L | ||||||||||
| No. 1 | 4.39-6.59 | |||||||||
| No. 2 | 2.28-3.43 | |||||||||
| No. 3 | 3.49-5.24 | |||||||||
| No. 4 | 1.90-2.86 | |||||||||
| No. 5 | 3.25-4.87 | |||||||||
| No. 6 | 1.30-1.95 | |||||||||
| Tiburon | ||||||||||
| 2.0L | (3) | |||||||||
| 2.7L | ||||||||||
| No. 1 | 4.39-6.59 | |||||||||
| No. 2 | 2.28-3.43 | |||||||||
| No. 3 | 3.49-5.24 | |||||||||
| No. 4 | 1.90-2.86 | |||||||||
| No. 5 | 3.25-4.87 | |||||||||
| No. 6 | 1.30-1.95 | |||||||||
| XG350 | (3) | |||||||||
|
||||||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.