Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2002XG350 BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONELECTRICALBODY ELECTRICAL SYSTEMGENERALSPECIFICATIONSINSTRUMENTS AND WARNING SYSTEM
2002 Hyundai XG350 Base
Instruments And Warning System
2002 Hyundai XG350 BaseSECTION Instruments And Warning System
Instruments & Warning System General Specifications (1 Of 2)
| Warning lamps | Bulb wattage (W) | Colors |
|---|---|---|
| High beam | 3.0 | Blue |
| Low fuel | 3.0 | Amber |
| Turn signal (LH, RH) | 1.4 | Green |
| Battery (charge) | 1.4 | Red |
| Oil pressure | 1.4 | Red |
| Air bag | 1.4 | Red |
| Parking brake | 1.4 | Red |
| Seat belt | 1.4 | Red |
| Check engine | 1.4 | Amber |
| ABS | 1.4 | Amber |
| Door ajar | 1.4 | Red |
| Stop lamp failure | 1.4 | Red |
| Cruise | 1.4 | Green |
| Fog lamp | 1.4 | Green |
| TCS | 1.4 | Amber |
| Sport | 1.4 | Amber |
Instruments & Warning System General Specifications (2 Of 2)
| Warning lamps | Bulb wattage (W) | Colors | |
|---|---|---|---|
| A/T | p | 1.4 | Green |
| R | 1.4 | Amber | |
| N | 1.4 | Green | |
| D | 1.4 | Green | |
| 5 | 1.4 | Green | |
| 4 | 1.4 | Green | |
| 3 | 1.4 | Green | |
| 2 | 1.4 | Green | |
| 1 | 1.4 | Green | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.