Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Integrated Memory System (IMS) Control Module
The Integrated Memory System (IMS) control module controls the operation of the driver's power seat and power outside mirrors. The IMS switch has a STOP button and 4 function buttons: AUTO, "M", "1" and "2". See Figure . When the ignition switch is ON and the IMS switch button "1" or "2" is pressed, the driver's seat and outside mirrors will be adjusted automatically to the memorized position. When the AUTO button is pressed, the driver's seat will move backward and forward so driver can get in or out more easily. Driver's power seat and power outside mirrors can be controlled independently by using appropriate manual switch.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.