Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2002XG 350 V6-3.5LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSGENERAL TORQUE SPECIFICATIONS
2002 Hyundai XG 350 V6-3.5L
General Torque Specifications
2002 Hyundai XG 350 V6-3.5LSECTION General Torque Specifications
Tightening Torque Table Of Standard Parts:
NOTE:
1. The torque's shown in the table are standard values under the following conditions:
- Nuts and bolts are made of steel bat; and galvanized.
- Galvanized plain steel washers are inserted.
- All nuts, bolts, and plain washers are dry
2. The torque's shown in the table are not applicable:
- When Spring washers, toothed washers and the like are inserted.
- If plastic parts are fastened.
- If self-tapping screws or self-locking nuts are used.
- If threads and surface are coated with oil.
3. If you reduce the torque's in the table to the percentage indicated below, under the following conditions, if will be the standard value.
- If spring washers are used. : 85 %
- If threads and bearing surfaces are stained with oil. : 85 %
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.