Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2002SONATA L4-2.4LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONSCYLINDER BLOCK SPECIFICATIONS
2002 Hyundai Sonata L4-2.4L
Cylinder Block Specifications
2002 Hyundai Sonata L4-2.4LSECTION Cylinder Block Specifications
TIGHTENING TORQUE
1 of 3
2 of 3
3 of 3
Main Bearing Cap Tightening Sequence
Caps should be installed with arrow mark directed toward front of engine. Cap number must be correct.
Tighten cap bolts to specified torque in sequence of center No. 2, No. 4, front and rear caps.
Cap bolts should be tightened evenly in from 4 to 5 stages before they are tightened to specified torque.
1 of 3
2 of 3
3 of 3
Main Bearing Cap Tightening Sequence
Caps should be installed with arrow mark directed toward front of engine. Cap number must be correct.
Tighten cap bolts to specified torque in sequence of center No. 2, No. 4, front and rear caps.
Cap bolts should be tightened evenly in from 4 to 5 stages before they are tightened to specified torque.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.