Alignment

2002 Hyundai Sonata L4-2.4LSECTION Alignment
Alignment Specifications revised per TSB # 02-50-005


Tire Pressure PSI Front/Rear 30/30
Total Toe (Cross):
Front 0 ± 2 mm (N/A)
Rear 2 ± 2 mm (N/A)
Camber (Cross):
Front 0 ± 0.5° * (0.5°)
Rear - 0.5° ± 0.5° * (0.5°)
Caster (Cross):
Front 3.25° ± 1° * (0.5°)
King Pin Angle:
Front 8°29'
Wheel Runout
Radial (Steel wheel) 0.6 mm (0.024 in) Avg. of LH & RH
Axial 1.0 mm (0.039 in)
Radial (Aluminum wheel) 0.3 mm (0.012 in)
Axial 0.3 mm (0.012 in)

* = Angle is not adjustable
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.