Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSHYUNDAI2002SANTA FE GLS V6-2.7LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINEENGINE MOUNT
2002 Hyundai Santa Fe GLS V6-2.7L
Engine Mount
2002 Hyundai Santa Fe GLS V6-2.7LSECTION Engine Mount
| Engine mounting insulator bolt | 40 - 55 Nm |
| Engine mounting bracket nut | 60 - 80 Nm |
| Engine mounting bracket bolt | 60 - 80 Nm |
| Engine support bracket stud | 30 - 40 Nm |
| Front roll stopper bracket to sub crossmember bolt | 40 - 55 Nm |
| Front roll stopper insulator bolt and nut | 50 - 65 Nm |
| Rear roll stopper bracket to cross member bolt | 40 - 55 Nm |
| Rear roll stopper insulator bolt and nut | 50 - 65 Nm |
| Transaxle mounting bracket bolt | 40 - 55 Nm |
| Transaxle mounting insulator bolt | 90 - 110 Nm |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.