Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Synchronization Of Power Windows
Synchronization of power windows links counter reading of window position to relevant Door Control Module (DCM). Synchronization must be performed whenever desynchronization occurs (battery disconnected or control module replaced). Synchronization is necessary for automatic raising/lowering function of power windows.
To synchronize power windows, press appropriate window switch in up position. When window reaches full up position maintain pressure for 3-5 seconds. When DCM detects motor lock-up for specified period position counter is reset to zero. Repeat procedure for each window.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.