Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2001 Hyundai XG300 BaseFACTORY OEM SERVICE PROCEDURE
Quick Lookups: Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.40 OZS. | 0.15 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.45 LBS. | 0.65 KG | R-134a | S | |||
| Automatic Transmission Fluid | 8.98 QTS. | 8.49 L | HYUNDAI Automatic Transmission Fluid SP III | S | |||
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | As required. | S | ||
| Clutch Fluid | N/A | N/A | DOT 3 Brake Fluid | As required. | S | ||
| Engine Coolant | 8.66 QTS. | 8.19 L | 50/50 mixture of Ethylene Glycol Antifreeze and water | The engine coolant should be compatible with aluminum engine parts. | S | ||
| Engine Oil | Drain and Refill,w/Filter | 4.54 QTS. | 4.29 L | API - SAE 10W-30,10W-40 or 10W-50 | S | ||
| Engine Oil | Drain and Refill,w/o Filter | 4.23 QTS. | 4 L | API - SAE 10W-30,10W-40 or 10W-50 | S | ||
| Fuel Tank | 18.50 GALS. | 70.03 L | S | ||||
| Power Steering Fluid | 1.06 QTS. | 1 L | Power Steering Fluid Type 3 Fluid | S | |||
| Windshield Washer Fluid | N/A | N/A | Use a good quality windshield washer fluid, diluted with water as necessary. | S | |||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.