2001 Hyundai XG300 BaseFACTORY OEM SERVICE PROCEDURE

Ignition Coil

IGNITION COIL RESISTANCE - Ohms @ 68Β°F (20Β°C)

Application Primary Secondary
Accent (1.5L & 1.6L) 0.45-0.55 10,300-13,900
Elantra (2.0L) 0.45-0.55 10,300-13,900
Santa Fe (2.4L) 0.77-0.95 10300-13900
Santa Fe (2.7L) 0.67-0.81 12100-14500
Sonata
2.4L (1) 0.77-0.95 10,300-13,900
2.5L 0.67-0.81 11,300-15,300
Tiburon (2.0L) 0.45-0.55 10,300-13,900
XG 300 0.67-0.82 11,340-15,260
(1) Value is approximate with coil energized. See IGNITION CHECKS in BASIC DIAGNOSTIC PROCEDURES article.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.