2001 Hyundai XG300 BaseFACTORY OEM SERVICE PROCEDURE

Ignition Timing

Ignition timing is computer controlled and is not adjustable. Standard reference timing data for various engine operating conditions is stored in Engine Control Module (ECM) memory. ECM controls ignition timing based on engine operating conditions (speed, load, temperature, etc.) and data stored in ECM memory. ECM controls timing through ignition coil operation.

BASE IGNITION TIMING (Degrees BTDC @ RPM)

Application (1) Base Timing
Accent
1.5L 4-14° @ 700-900 RPM
1.6L 4-14° @ 650-850 RPM
Elantra (2.0L) 3-13° @ 600-800 RPM
Santa Fe
2.4L 4-20° @ 625-825 RPM
2.7L 4-20° @ 625-825 RPM
Sonata
2.4L 8-12° @ 700-900 RPM
2.5L 7-17° @ 600-800 RPM
Tiburon (2.0L) 5-15° @ 700-900 RPM
XG 300 10-20° @ 600-800 RPM
(1) Ignition timing is not adjustable.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.