Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2001 Hyundai XG300 BaseFACTORY OEM SERVICE PROCEDURE
Starter Specifications
STARTER SPECIFICATIONS
| Application | Specification | ||||||
|---|---|---|---|---|---|---|---|
| Armature Maximum Runout | |||||||
| Accent & Elantra | (1) | ||||||
| Santa Fe, Sonata, Tiburon & XG300 | |||||||
| Standard | 0.002" (0.05 mm) | ||||||
| Limit | 0.004" (0.10 mm) | ||||||
| Brush Length | (2) | ||||||
| Commutator Outside Diameter | |||||||
| Accent & Elantra | (1) | ||||||
| Santa Fe, Sonata, Tiburon & XG300 | |||||||
| Standard Diameter | 1.16" (29.4 mm) | ||||||
| Wear Limit | 1.12" (28.4 mm) | ||||||
| Insulator Depth | |||||||
| Accent & Elantra | (1) | ||||||
| Santa Fe, Sonata, Tiburon & XG300 | |||||||
| Standard Depth | 0.020" (0.50 mm) | ||||||
| Wear Limit | 0.008" (0.20 mm) | ||||||
| Pinion Gap | 0.02-0.08" (0.5-2.0 mm) | ||||||
|
|||||||
Factory Service Tools
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.