Name: AllOEMManuals
Address: 316 Brandywine Ave, Streetman, TX, 75859, US
Telephone: +14699867883
Price range: $$

Apply a coating of the specified grease to the interior of the bushing.
Specified grease:

Chassis grease SAE J310, NLGI No. 0

Fig 1: Applying Grease To Interior Of Bushing
Courtesy of HYUNDAI MOTOR CO.
Move the shift lever and the transaxle range switch to the N position, and install the control cable.

Fig 2: Installing Control Cable
Courtesy of HYUNDAI MOTOR CO.
When connecting the control cable to the transaxle mounting bracket, install the clip until it contacts the control cable.

Fig 3: Installing Clip
Courtesy of HYUNDAI MOTOR CO.
Install the bolt-washer assembly and nut.

Fig 4: Installing Bolt-Washer Assembly & Nut
Courtesy of HYUNDAI MOTOR CO.
Install the clip pin and self lock pin. (shift lever side).

Fig 5: Installing Clip Pin And Self Lock Pin (Shift Lever Side)
Courtesy of HYUNDAI MOTOR CO.
Connect the position indicator light connector, the O/D switch connector, the parking position switch connector, normal/economy select switch connector and the shift lock solenoid connector.
Install the shift lever indicator assembly.

Fig 6: Installing Shift Lever Indicator Assembly
Courtesy of HYUNDAI MOTOR CO.
Apply the specified grease at the place shown in the figure.
Specified grease:

Multipurpose grease SAE J310, NLGI No. 2

Fig 7: Removing Shifter Lever Knob Assembly
Courtesy of HYUNDAI MOTOR CO.
Place the shift lever in the N position, and then turn the cam adjusting so that the clearance between the cam adjusting and the lever assembly end in within the standard value.
Standard value (A): 15.2-15.9 mm (0.598-0.625 in.)

NOTE: Be sure to face B of the adjusting cam to the push button (driver's side).